CERAMICS WORKSHOP 2

COIL POTS

In this session we created coil pots. We used ling strips of cylinder clay to put on a base which we used a knife to make a circle clean cut circle with. We got the coils and curled them around the base and blended them. We ensured it was a stable by using cross hatching on the cylinder parts, to the base. I did two of these in this session.

CERAMICS WORKSHOP 1

In this workshop we started making tiles and pots which were linked to the work on our mood boards. We began by adding patterns onto the tiles and then creating different gradients on the tiles, this was done by using different tools and objects.
Then when we finished it was to be put for the Kiln.
The pot shown in the picture is in link with the pot within my mood board.

TEXTILES WORKSHOP 3

PRINTING

To begin, the last session of the 4 (one I missed and am following up in this session) was press printing patterns onto the material from the last session. These patterns were mainly photos that we had used for the last workshop. We used fabric paint to put on the materials.
Next we began to sew and add extra materials, for example buttons. We used separate materials and patterns to create an A4 sized sheet.

TEXTILES WORKSHOP 2

FABRIC MAKING

At the beginning of the day we began to make fabric using fabric fiber.
The things we needed were:

Towel
Bubble wrap
Fabric fibers
Washing up liquid
Warm water
Detergent
Thin wire material

Boiling water 

A Bowl 

With this we would get the fabric fibers and layer them over eachother in thin amounts. Then after we cross layered the fabrics we used the thin wire material and place it over the fabric fibers then use the warm water which should have washing up liquid in and dripped the water over the wire. After this, when we had layered our pattern or symbols on, we soaked the fabric in the warm soap water and then rolled it into the bubble wrap. We rolled the fabric for 4 mins, then we turned it 90 degrees and redid this method to streath it out evenly. When this was completed, we wrapped it into a material and placed it in boiling water. 

BATIK 

We used methods from the previous session to draw previous patterns from our other pieces which we then used brusho ink to add colour to the paper. Some of the materials we used were cotton and silk, we did basic trials on a strong paper. 

We then got some material and put a coloured background for the next session in textiles. Some of these we tie dyed or just painted. 

TEXTILES WORKSHOP 1

BATIK

In the first session of the 4 week period in which I am doing textiles, we had to create patterns with wax on paper and fabric. The purpose of this was so that when we covered the material/paper with ink the wax would not absorb the wax leaving a pattern out despite being covered in colour. We could repeat this on the same sheet to give different coloured backgrounds and different sections to the wax. Once the sheet was completed you would use news print to go over the ink to take away excess, then we would use the news print to iron the fabric/paper to smoothen the wax into the sheet.

FABRIC PAINTING

in the second section to the first session we then got pieces of material and painted with a special paint designed to stain into material and with this we created our own pattern. We also used a type of 3D outliner, which looked a lot like henna, to create an added effect to our work.